View HMC546LP2ETR_8572646.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

10 w , failsafe , gaas , spdt switch 0. 2 ghz to 2.7 ghz data sheet h mc546lp2e rev. e document feedback information furnished by analog devices is believed to be accurate and reliable. however, n o responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. o ne technology way, p.o. box 9106, norwood, ma 02062 - 9106, u.s.a. tel: 781.329.4700 ? 2016 analog devices, inc. all rights reserved. technical support www.analog.com features h igh i nput p0.1db: 40 dbm tx low insertion loss: 0.4 db high input ip3: 67 dbm positive control: 0 v low control; 3 v to 8 v high control failsafe o peration : tx is on when no dc power is applied applications lna p rotection, wimax , and wibro cel lular , pcs , 3g, and td - scdma i nfrastructure private mobile radio and public safety hands ets automotive t elematics functional block dia gram 6 5 1 2 3 4 tx v ctl acg rfc package base v dd rx hmc546lp2e 13975-001 f igure 1. general description the hmc 546 lp2e is a failsafe spdt switch in a leadless dfn surface - mount plastic package for use in tran smit / receive and lna protection applications that require very low distortion and high power handling of up to 10 watts. the hmc546lp2e require s external matching and is suitable for narrow - band applications within 200 mhz to 2700 mhz. th is narrow - band switch is well suited for wimax and wibro repeaters, private mobile radio (pmr ), and automotive telematic applications. the design provides exceptional p0.1db of 40 dbm and iip3 of 65 dbm on the t ransmit (tx) port. the failsafe to pology allows the switch to provide a low loss path from rfc to tx, when no dc power is available.
hmc546lp2e data sheet rev. e | page 2 of 13 table of contents features .............................................................................................. 1 applications ....................................................................................... 1 functional block diagram .............................................................. 1 general description ......................................................................... 1 revision history ............................................................................... 2 specifications ..................................................................................... 3 absolute maximum ratings ............................................................ 5 esd caution .................................................................................. 5 pin configuration and function descriptions ............................. 6 interface schematics .................................................................... 6 typical performance characteristics ............................................. 7 1843 mhz tuning .........................................................................7 2015 mhz tuning .........................................................................8 2350 mhz tuning .........................................................................9 2600 mhz tuning ...................................................................... 10 applications information ............................................................... 11 components for selected frequencies ..................................... 11 evaluation pcb ........................................................................... 12 outline dimensions ....................................................................... 13 ordering guide .......................................................................... 13 revision history this hittite microwave products data sheet has been reformatted to meet the styles and standards of analog devices, inc. 5/2016v.04.1115 to rev. e updated format .................................................................. universal deleted hmc546lp2 .................................................... throughout deleted table 2, renumbered sequentially ................................... 4 added pin function descriptions, table 5, renumbered sequentially ....................................................................................... 7 changes to table 7 .......................................................................... 13 updated outline dimensions ....................................................... 14 changes to ordering guide .......................................................... 14
data sheet hmc546lp2e rev. e | page 3 of 13 specifications t a = 25c, v dd = 0 v/3 v dc, v ctl = 0 v/ 3 v dc, 50 ? system. specifications and data reflect measurements using the respective application circuit components for each frequency band as listed in tabl e 1 . table 1. parameter symbol test conditions/com ments min typ max unit frequency range 200 2700 m hz insertion loss tx to rfc f = 1805 mhz to 1910 mhz 0.3 0.6 db f = 2010 mhz to 2025 mhz 0.4 0.7 db f = 2300 mhz to 2480 mhz 0.6 0.8 db f = 2500 mhz to 2700 mhz 0.5 0.8 db rfc to r x f = 1805 mhz to 1910 mhz 0.4 0.7 db f = 2010 mhz to 2025 mhz 0.3 0.6 db f = 2300 mhz to 2480 mhz 1.1 1.5 db f = 2500 mhz to 2700 mhz 0.7 1.1 db isolation tx to rfc f = 1805 mhz to 1910 mhz 15 23 db f = 2010 mhz to 2025 mhz 14 22 db f = 2300 mhz to 2480 mhz 15 20 db f = 2500 mhz to 2700 mhz 10 15 db rfc to rx f = 1805 mhz to 1910 mhz 22 30 db f = 2010 mhz to 2025 mhz 20 27 db f = 2300 mhz to 2480 mhz 25 30 db f = 2500 mhz to 2700 mhz 30 40 db return loss tx to rfc f = 1805 mhz to 1910 mhz 25 db f = 2010 mhz to 2025 mhz 20 db f = 2300 mhz to 2480 mhz 22 db f = 2500 mhz to 2700 mhz 20 db rfc to rx f = 1805 mhz to 1910 mhz 25 db f = 2010 mhz to 2025 mhz 25 db f = 2300 mhz to 2480 mhz 10 db f = 2500 mhz to 2700 mhz 12 db input linearity 0.1 db power compression p0.1db tx to rfc f = 1805 mhz to 1910 mhz 38 40 dbm f = 2010 mhz to 2025 mhz 39 41 dbm f = 2300 mhz to 2480 mhz 36.5 38.5 dbm f = 25 00 mhz to 2700 mhz 38.5 40.5 dbm rfc to rx f = 1805 mhz to 1910 mhz 19 21 dbm f = 2010 mhz to 2025 mhz 19 21 dbm f = 2300 mhz to 2480 mhz 17 19 dbm f = 2500 mhz to 2700 mhz 18 20 dbm input third - order intercept ip3 two - tone input power = 19 dbm/tone, ?f = 1 mhz tx to rfc f = 1805 mhz to 1910 mhz 65 dbm f = 2010 mhz to 2025 mhz 64 dbm f = 2300 mhz to 2480 mhz 67 dbm f = 2500 mhz to 2700 mhz 62 dbm
hmc546lp2e data sheet rev. e | page 4 of 13 parameter symbol test conditions/com ments min typ max unit rfc to rx f 1805 mhz to 1910 mhz 33 dbm f 2010 mhz to 2025 mhz 32 dbm f 2300 mhz to 2480 mhz 33 dbm f 2500 mhz to 2700 mhz 32 dbm input third - order intercept , v ctl 0 v/5 v ip3 two - tone input power 1 9 dbm/tone, f 1 mhz tx to rfc f 1805 mhz to 1910 mhz 66 dbm f 2010 mhz to 2025 mhz 64 dbm f 2300 mhz to 2480 mhz 67 dbm f 2500 mhz to 2700 mhz 62 dbm rfc to rx f 1805 mhz to 1910 mhz 44 dbm f 2010 mhz to 2025 mhz 45 dbm f 2300 mhz to 2480 mhz 45 dbm f 2500 mhz to 2700 mhz 43 dbm s witching characteristics rise and fall time t rise , t fall t rise , t fall 10 to 90 of rf output 21 ns on time t on 50 v ctl to 90 of rf output 102 ns off time t off 50 v ctl to 1 0 of rf output 36 ns
data sheet hmc546lp2e rev. e | page 5 of 13 absolute maximum rat ings table 2. parameter rating supply voltage (v dd ) 10 v control voltage range (v ctl ) ?0.2 v to v dd to +1 v rf input power, cw peak 1 tx port , v dd = 3 v and v dd = 5 v 40 dbm rx port , v dd = 3 v 24 dbm rx port, v dd = 5 v 29 dbm hot s witch 24 dbm contin uous power dissipation (p diss ) tx port, v dd = 3 v and v dd = 5 v 1.12 w rx port, v dd = 3 v 73 mw rx port, v dd = 5 v 232 mw junction t o case thermal resistance , jc tx port, v dd = 3 v and v dd = 5 v 54c/w rx port, v dd = 3 v 68c/w rx port, v dd = 5 v 86c/w temperature junction, t j 150c storage ?65c to +150c reflow (msl 1 r ating) 260c esd sensitivity human body model (hbm) 250 v ( class 1a ) 1 maximum input power can be higher when the radio frequency (rf) input is pulsed with a duty cycle <100%. stresses at or above those listed under absolute maximum ratings may cause permanent damage to the product. this is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. operation beyond the maximum operating conditions for extended periods may affect product reliability. esd caution
hmc546lp2e data sheet rev. e | page 6 of 13 pin configuration and function descripti ons 6 5 1 2 3 4 tx v ctl acg rfc v dd rx hmc546lp2e top view (not to scale) notes 1. exposed pad. the package bottom has an exposed metal paddle that must be connected to the printed circuit board (pcb) rf ground. 13975-002 figure 2 . pin configuration table 3 . pin function descriptions pin no. mnemonic description 1 tx r adio f requency (rf) transmit . this pin is dc - coupled and not well matched to 50 ?. external matching components and a dc blocking cap acitor are required. 2 v ctl control voltage in put . for more information about the v ctl pin, see table 4 and figure 3. 3 acg ac ground. an external capacitor from acg to ground is required. 4 rx rf r eceive. this pin is dc - coupled and not well matched to 50 ?. external matching components and a dc blocking capacitor are required. 5 v dd supply voltage. see figure 4 for the interface schematic. 6 rf c rf c ommon. this pin is dc - coupled and not well matched to 50 ?. external matching components and a dc blocking capacitor are required. epad exposed pad. the package bottom has an exposed metal paddle that must be connected to the printed circuit board (pcb) rf ground. table 4. truth table control input 1 signal path state v ctl v dd rfc to tx rfc to rx 0 v v dd off on v dd v dd on off 0 v 0 v on off high -z high -z on off 1 v dd = 3 v to 8 v, and control input voltage tolerances are 0.2 v dc. interface schematics v ctl 13975-003 figure 3 . v ctl interface v dd 13975-004 figure 4 . v dd interface
data sheet hmc546lp2e rev. e | page 7 of 13 typical performance characteristics 1843 mhz tuning 0 ?3.0 ?2.5 ?2.0 ?1.5 ?1.0 ?0.5 1.75 1.80 1.85 1.90 1.95 insertion loss (db) frequency (ghz) tx, +85c tx, +25c tx, ?40c 13975-006 figure 5 . tx to rfc insertion loss vs. frequency over temperature 0 ?45 ?30 ?35 ?40 ?25 ?20 ?15 ?10 ?5 1.75 1.80 1.85 1.90 1.95 isolation (db) frequency (ghz) rfc to tx rfc to rx 13975-007 figure 6 . isolation vs. frequency 75 20 45 40 35 30 25 50 55 60 65 70 3 4 5 6 7 8 ip3 (dbm) voltage (v) rfc to tx rfc to rx 13975-008 figure 7 . input ip3 vs. voltage 0 ?3.0 ?2.5 ?2.0 ?1.5 ?1.0 ?0.5 1.75 1.80 1.85 1.90 1.95 insertion loss (db) frequency (ghz) tx, +85c tx, +25c tx, ?40c 13975-009 figure 8 . rfc to rx insertion loss vs. frequency over temperature 0 ?40 ?30 ?35 ?25 ?20 ?15 ?10 ?5 1.75 1.80 1.85 1.90 1.95 return loss (db) frequency (ghz) tx, input tx, output rx, input rx, output 13975-010 figure 9 . return loss vs. frequency
hmc546lp2e data sheet rev. e | page 8 of 13 2015 mhz tuning 0 ?3.0 ?2.5 ?2.0 ?1.5 ?1.0 ?0.5 1.90 1.95 2.00 2.05 2.10 insertion loss (db) frequency (ghz) tx, +85c tx, +25c tx, ?40c 13975-0 11 figure 10 . tx to rfc insertion loss vs. frequency over temperature 0 ?35 ?30 ?25 ?20 ?15 ?10 ?5 isolation (db) frequency (ghz) rfc to tx rfc to rx 1.90 1.95 2.00 2.05 2.10 13975-012 figure 11 . isolation vs. frequency 75 20 45 40 35 30 25 50 55 60 65 70 3 4 5 6 7 8 ip3 (dbm) voltage (v) rfc to tx rfc to rx 13975-013 figure 12 . input ip3 vs. voltage 0 ?3.0 ?2.5 ?2.0 ?1.5 ?1.0 ?0.5 1.90 1.95 2.00 2.05 2.10 insertion loss (db) frequency (ghz) rx, +85c rx, +25c rx, ?40c 13975-014 figure 13 . rfc to rx insertion loss vs. frequency over temperature return loss (db) frequency (ghz) tx, input tx, output rx, input rx, output 0 ?35 ?30 ?25 ?20 ?15 ?10 ?5 1.90 1.95 2.00 2.05 2.10 13975-015 figure 14 . return loss vs. frequency
data sheet hmc546lp2e rev. e | page 9 of 13 2350 mhz tuning 0 ?3.0 ?2.5 ?2.0 ?1.5 ?1.0 ?0.5 2.30 2.35 2.40 2.45 2.50 insertion loss (db) frequency (ghz) tx, +85c tx, +25c tx, ?40c 13975-016 figure 15 . tx to rfc insertion loss vs. frequency o ver temperat ure 0 ?45 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 2.30 2.35 2.40 2.45 2.50 isolation (db) frequency (ghz) rfc to tx rfc to rx 13975-017 figure 16 . isolation vs. frequency 75 70 65 60 55 50 45 40 35 30 25 20 3 4 5 6 7 8 ip3 (dbm) voltage (v) rfc to tx rfc to rx 13975-018 figure 17 . input ip3 vs. voltage 0 ?3.0 ?2.5 ?1.5 ?0.5 ?2.0 ?1.0 2.30 2.35 2.40 2.45 2.50 insertion loss (db) frequency (ghz) rx, +85c rx, +25c rx, ?40c 13975-019 figure 18 . rfc to rx insertion loss vs. frequency over temperature 0 ?35 ?30 ?25 ?15 ?5 ?20 ?10 2.30 2.35 2.40 2.45 2.50 frequency (ghz) return loss (db) tx, input tx, output rx, input rx, output 13975-020 figure 19 . return loss vs. frequency
hmc546lp2e data sheet rev. e | page 10 of 13 2600 mhz tuning 0 ?3.0 ?2.5 ?1.5 ?0.5 ?2.0 ?1.0 2.50 2.55 2.60 2.65 2.70 insertion loss (db) frequency (ghz) tx, +85c tx, +25c tx, ?40c 13975-021 figure 20 . tx to rfc insertion loss vs. frequency over temperature 0 ?35 ?30 ?25 ?15 ?5 ?20 ?10 isolation (db) 2.50 2.55 2.60 2.65 2.70 frequency (ghz) rfc to tx rfc to rx 13975-022 figure 21 . isolation vs. frequency 75 70 65 60 55 50 45 40 35 30 25 20 3 4 5 6 7 8 ip3 (dbm) voltage (v) rfc to tx rfc to rx 13975-023 figure 22 . input ip3 vs. v oltage 0 ?3.0 ?2.5 ?1.5 ?0.5 ?2.0 ?1.0 2.50 2.55 2.60 2.65 2.70 insertion loss (db) frequency (ghz) rx, +85c rx, +25c rx, ?40c 13975-024 figure 23 . rfc to rx insertion loss vs. frequency over temperature 0 ?40 ?30 ?35 ?25 ?15 ?5 ?20 ?10 return loss (db) 2.50 2.55 2.60 2.65 2.70 frequency (ghz) tx, input tx, output rx, input rx, output 13975-025 figure 24 . return loss vs. frequency
data sheet hmc546lp2e rev. e | page 11 of 13 application s information tx 1 c1 j1 j5 c7 c3 j3 2 3 4 5 6 l2 c2 j4 j2 c5 c6 v ctl acg rfc v dd rx l1 hmc546lp2e 13975-026 figure 25 . applications circuit components for selec ted frequencies table 5. evaluation board components by frequency component tuned frequency 1 1843 mhz 2015 mhz 2350 mhz 2600 mhz c1, c3, c5 2 330 pf 330 pf 330 pf 330 pf c2 1.2 pf 0.8 pf 0.6 pf 0.7 p f c6 0.5 pf n/a n/a n/a c7 3.0 pf 2.4 pf 2.0 pf 1.5 pf l1 3 , 4 5.1 nh 4.3 nh 2.0 nh 1.6 nh l2 5 4.3 nh 3.9 nh 3.3 nh 2.7 nh 1 n/a means not applicable. 2 dc blocking capacitors. 3 0402 inductors, 5% tolerance; fo r tuned frequencies of 1843 mhz , 2015 mhz, and 2350 m hz . 4 0603 inductor, 5% tolerance; for tuned frequency of 2600 mhz only. 5 0402 inductor, 5% tolerance; for all tuned frequency levels.
hmc546lp2e data sheet rev. e | page 12 of 13 evaluation pcb when using t he circuit board in an application , generate proper rf circuit design techniques . ensure that s igna l lines have 50 impedance and that the package ground leads and exposed paddle ar e connected directly to the ground plane , as shown in figure 26. the evaluation circuit board shown in figure 26 is avail able from analog devices, inc., upon request . bill of materials table 6 . bill of materials 1 item 2 description j1 to j3 pcb mount sma rf connector j4 to j6 dc pins c1 to c 3 c apacitor s , 0402 package l1, l2 inductors u1 hmc546lp2e transmit/receive switches pcb 3 110780 evaluation pcb 1 when requesting an evaluation board, reference the appropriate evaluation pcb number listed in the ordering guide section. 2 refer to table 5 for component values. 3 circuit board material: rogers 4350. 13975-027 figure 26 . evaluation printed circuit board (pcb)
data sheet hmc546lp2e rev. e | page 13 of 13 outline dimensions 1.45 1.40 1.35 0.40 0.35 0.25 top view side view 0.30 0.25 0.20 bottom view pin 1 index are a sea ting plane 1.00 0.90 0.80 0.85 0.80 0.75 0.203 ref 0.05 max 0.02 nom 1.30 ref 0.65 bsc exposed pa d for proper connection of the exposed pad, refer to the pin configuration and function descriptions section of this data sheet. 12-08-2015- a pkg-000000 2.05 2.00 sq 1.95 5 8 1 4 coplanarity 0.08 figure 27 . 6- lead lead frame chip scale package [lfcsp] 2 mm 2 mm body and 0.90 mm package height ( cp -6- 10 ) dimensions shown in millimeters ordering guide model 1 temperature range msl rating 2 package description package option package marking 3 hmc546lp2e ?40 c to +85c msl1 6- lead lead frame chip scale package [lfcsp] cp-6-10 xxxx 546 hmc546lp2e tr ?40 c to +85c msl1 6- lead lead frame chip scale package [lfcsp] cp-6-10 xxxx 546 110782 - hmc546lp2 evaluation board, 1843 mhz tun e 115201-hmc546lp2 evaluation board, 2015 mhz tune 115202-hmc546lp2 evaluation board, 2350 mhz tune 115203-hmc546lp2 evaluation board, 2600 mhz tune 1 hmc 546lp2 e and hmc546lp2 e tr are rohs compliant parts. 2 see the absolute maximum ratings section. 3 xxxx is the 4 - digit lot number. ? 2016 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. d13975 -0- 5/16(e)

▲Up To Search▲

Price & Availability of HMC546LP2ETR

	To Download HMC546LP2ETR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .